House wiring Tutorial (Tagalog)( NC 2 Electrical Installation) with English subtitle


This video is explaining on how to install 1 bulb controlled y 1 location This is the most common connection in most houses Before we start , let us test the materials needed The switch and the wires In testing the material we need to use a multitester First we test is the switch This is the switch In the switch there is two terminal Now let us test switch if it is good condition To test the switch we must set the multitester, to continuity or in the resistance setting Now let us set this to continuity setting If there is connection it will sounds Initial setting of switch is off To test the switch put the test probes to the terminal Initial test is off, so no connection Now if we turn on It will sounds If we turn off no sounds So meaning this switch is good condition So next let us test the wire This is the wire this is the opposite end To test the wire Let us connect the probes in each wire So it is still set to resistance or continuity checker To test if it is short circuit put the test probes in each wire So it must have no reading or no sounds So no sounds it means its safe to use this wire Now let us test the wire if there is any open circuit To test any possible open circuit in the wire connect the test probes on each corresponding ends of the wire Either one of this has connection in this wire It might be this one is the connection or this one, so lets test If no one has connection so there is an open circuit so that was his connection So this wire is not broken Now lets put the test probe on the other wire same process lets test okay overall it is good wire So this one is my second video I got accidentally deleted my first video So if you look its already cut and install all the wires Because i already installed it Lets start to build this 1 bulb controlled by 1 location This is the other materials we need socket outlet junction box circuit breaker Now lets talk how to install wire properly Do not cut the wire Example you measure it then you cut it Never do that Because possibly the wire we cut will be short or excessive Example you cut this Now the wire you cut will not be change The remedy is connect other wire to make it long but it will consume a lot of time So that method is not good The right thing you do is put the wire first inside the juntion bx So the problem is i already cut this Example this one i already cut this on my first video So this wire is not already long But i recommended that before you cut the wire is put it on the junction box So example this wire is long Now install any materials example this one I installed it Install the socket Dont cut the wire yet after you installed it you can now cut the wire So before you installed it you can adjust the wire with this method So that it will be more accurate the wire we used I recommend you to do that after you install put some staple on both ends Now lets install the switch Now we finished to install Now we will do the wiring Now we have two wire, this is our main source So example this connection is line to ground, this is the hot wire and this the ground There are two kind of connections line to line and line to ground The line to ground has hot wire and ground The hot wire carry a 220 volts The ground has no power In line to line both of wire carry same power It has 110 volts each wire So its the same power Now i will explain is the line to ground Because the line to ground is specified that hot wire is for switch Thats why its better to explain compare to line to line Because line to line can assign any wire for switch for the reason it has the same power in the diagram the ground is directly connected in the bulb or load Now we finished to connect the ground directly to bulb Now the hot wire is connected in any wire in the switch So this one i choose for switch The other wire of switch is connected to the bulb The outlet is directly connected in the power source No polarity so any wire connect in the source But be careful not to short the two wires the ground and the hot wire The outlet directly connected in the main power So lets put electrical tapes In electrical the most difficult is the installation Not the wiring is the most difficult Before we test it , let us check the connection If it is short circuit or it has open circuit In testing short circuit, the main source is must be parallel the line and the ground To check it set first the multitester in resistance No reading mean no short circuit which is good So the bulb directly connected in the ground Turn on the switch there is connection Now in the outlet So our connection is safe Let us Light up the bulb Lets turn on the breaker So its light up and off So this mean our connection is good Now this connection is 2 bulb controlled by 1 location First we do is directly connect the bulb in the ground So every load added it must be directly connect to the ground The other wire for the switch Dont put the wire directly connect in the main source If we put the second wire directly to the hot wire it will always turn on the bulb Lets connect the second wire in the switch where the other bulb also connected switch on Now let us test the outlet To test the outlet If there is power we must set the tester in the AC voltage to the highest setting Now we test the outlet No polarity It has reading Here also it has reading The outlet is working So thats all Pls subscribe for more videos

100 comments on “House wiring Tutorial (Tagalog)( NC 2 Electrical Installation) with English subtitle”

  1. Jefrie Bilar says:

    pls follow PEC ….apply r.a 7920

  2. Gary Dagcutan says:

    Ang galing mo sir hulog ka ng langit sa akin thanks a lot

  3. Marlon Calanao says:

    dapat standard na wire para deretsu na at parallel sa load of current..

  4. Kimay Hadap says:

    Graduate ako ng BSHRM but I'm planning to pursue my electrical engineering career. Very helpful tong vid na to para sa aming nag sisimula pa lang.. Thank you sir! Keep it up. Wag mo po pansinin yang bashers. Hehehe

    Btw, balak ko munang mag tesda ng EIM nc2 and nc3 kung papalarin, then autocad para din syempre if ever na di ko matuloy yung BSEE, eh meron pa din akong alternative.. Tapos if ready na ko pumasok sa MATHS, go na ako bilang BSEE hehehe! My father is BSEE undergrad and contractor sya now. Meron na din akong basic knowledge sa mga tools, equipments, supplies, materials etc..

    Share ko lang hehehehe..

  5. mike jonele villanueva says:

    good day sir …. paano po ba mag install ng bolt on circuit breaker…..para sa kwartu lang po …. saan po ba kumoha ng source….

  6. Merly Legion says:

    Good job sir dexeen

  7. garry jose mariano says:

    Sa susunod sir mas effective guro kung bigyan mong buhay ang pagsasalita mo.aantukin ang mag aaral s beses mo eh.ok sana.pra kang may bumubulong….

  8. Ronelo Patol says:

    Boss salamat sa pag share mo ng kaalaman sa electrical laking tulong ko sa kagaya kong konti lng ang alam sa electrical

  9. Ronelo Patol says:

    Boss pano ang pag jumper ng 1 swict at 1 outlet yung isang klase ng omni ung binabaon sa cemento
    Ty in advance boss

  10. aLvin87 ِ ِ says:

    Sir mas ok siguro kung my schematic diagram para mas maintindihan yung connection, at kung saan ikokonek at pano ikokonek.
    Industrial Engineering Student po ako hehe

  11. Mersz Arevalo says:

    Nice video

  12. Hanna Catunao says:

    Maganda pa cguro ipikita m nalang wag kana magsalita.kc parang ikaw langman ang nakarinig ng salita m ser.wala effec dimo m.

  13. dodong casre says:

    ok n ok video mo pero ikaw para antok n antok 😂😂😂

  14. jefferson marinda says:

    Good day po. Sir ppwd po ba akong mag patulong . Gusto ko sana bumili ng tester like ng ginagamit nyo. Papanu ko malalaman kong dipective po ung bbilhin kong. Tester. Salamat ang Godbless.

  15. Animu lovers says:

    Wow salamat po sa idea kuya

  16. marcial rifa says:

    Ganda ng video mo boss sana lahat maging kagaya mo Na pag nag post ng video sa you tube ay yung may natututunan ang mga viewers tanung ko lang boss diba pag 1 bulb controlled by 2 switch may jumpper po ba dun at yung s.p.o diba magkaiba yun sa c.o tnx boss at mabuhay ka

  17. rustico vertuso says:

    boss bagong subs ako d2 malaking tulong ito sa mga mahilig sa DIY..
    mabuhay ka boss..
    👍🏾👍🏾👍🏾👍🏾👍🏾

  18. Sforzando clyde says:

    More energy po… Thanks..

  19. Reynaldo Perez says:

    Mariribukak

  20. fitofight says:

    Dito sa pinas ang juction box na pang conduit pipe ay ginagamit sa duplex wire atbp. Mali ito pero ganun ang ginagawa ng lahat kc wala naman taung mabibili dito na junction box na pang pdx wire, pang moulding. Mali sa kadahilanang hindi matatakpanan ang butas.

  21. statix TV says:

    bagohan lng po aq s eletrical.ano po ang common size ng wire galing s circuit breaker at papunta s loob ng bahay?salamat po.

  22. albert dumol says:

    Ayos. Medyo hirap din ako sa electrical. Basic din https://youtu.be/pw3rF5B7VfQ penge din ako link ng iba nyong alam. Ty

  23. Super Trash says:

    Salamat sa video mo sir dami mong matutulungan

  24. free vid 03 says:

    Parang namamaty ung nag sasalita

  25. GERBAX channel says:

    anong size po ng wire ang required ng meralco?

  26. Rockstone Unob says:

    Bakit parang takot ka mag salita? Meron bang natutulog?

  27. Philip Omlang says:

    New subscriber here!sir paano nman po ung mga size nuber ng mga wire?diba magkaiba ung s source,outlet and bulb?…paturo nman hu…thanks.

  28. House Dr tutorial says:

    Boss tnx kaw ang inspiration q kyo q gumawa ng channel i always subcribe to you godbless

  29. Lou Gee says:

    Thank you. May natutunan na naman ako.

  30. Jessie Oguera says:

    boss bkt nbulong ka illegal connection k cguro

  31. Willy Pinggoy says:

    Napaka hina ng boses kala mo may pinag tataguan

  32. try this video kain pa more says:

    Bobo basher na yan wlang alam yan maganda nga pinakita ni sir house wiring yan ganyan din ginagawa namin ..Good job sir

  33. ALLIYEAH CHLOE says:

    Parang bagong gising sir ah mahina boses hehehe✌✌✌

  34. Ricks TV Lover says:

    Pwede ba yung
    1.25 main source at outlet
    0.75 bulb at switch

  35. EJAY SAVAGE says:

    Nice video sir
    Isa akong EIM at nakatulong po ang video mo dahil malinaw ang pag explain mo😊
    Thanks po sir👍

  36. Macky Toks says:

    new subscribers sir salamat sa mga vids

  37. Sky Limbo says:

    Di ko maintindihan pinagsasabi mo .. para k lang nabulong ung parang nagtatago s pinaggagawa.

  38. MAY PERA sa ONLINE says:

    sir pa help po,paano kumuha ng NC2 ,di kasi ako nakakuha nyan,dahil nag abroad agad ako sa saudi bilang building electrician.Ano po gagawin ko para makakuha niyan?

  39. Rufino orque says:

    Sir uk lang ba kahit hnd dretso sa poste yung breaker baga dumugtong lang ako sa isang breaker dn na may wirring na slamat ..

  40. John Tronio says:

    Hirap ka magtagalog boss

  41. statix TV says:

    Bos,kpag isang cb lng gagamitin s bahay n may 4-5 n ilaw at 3-4 outlet n tatlohang saksakan,ilang amps dpat gamitin n cb?

  42. lodi petmalu werpa says:

    Boss new subscriber. Slamat sa share ideas mo about wire install at pag connect. Bka pwd gawa ka video ng loading ng main breacker ilan watch.

  43. MARTY Olitoquit14 says:

    Mahirap pala pag magugulatin ka Jan sa pag electrical,kasi tulad ko pag nak dkit ng kunti biglang nabibitawan ko ang long nose, pero kahit Wala sakin nag turo nito Kaya kurin mag install nito,,, itong vdeo nato dag2 narin to sa kaalaman ko, salamat bro sa share mong vdeo,,

  44. mystery boie says:

    Mongoloid ka ang bagal ng insructuon mo bagal mo magpaliwanag sayang oras sayo 😜😜😜

  45. private citizen says:

    wag ma ingay baka magising yung totoong may ari ng vlog na ito puyat kasi sya pag jujumper sa poste ng meralco kaya ako nalang muna mag turo sa inyo..joke lng po…nice video very simple gets ko agad!.thnk u po..shhh..

  46. Bullets And Missiles says:

    Kung basic ng wiring instillations ang usapan sir ay may tama at mali sa mga sinabi mo. Sa tama yung way of checking using the multi tester at yung mga connections mo. Sa mali naman, 1st, hindi dapat magkasama ang mga ilaw at power outlet in one circuit. 2nd, one type of flat cord lang ang ginamit mo which means mali ang laki ng wire ng isa o maaring parehas sila(depende kung anong gauge ng ginamit mo). Magka iba wire gauge for light and outlet dahil magka iba sila ng konsumo ng kuryente, the same reason why they're connected with different circuit breakers with different amperage. At sana sir di tinitipid yung protection ng splicing

  47. Jerastom Lumactao says:

    Salamat po

  48. Jerastom Lumactao says:

    Tanung ko lang bosing anung number ng wire para sa house wiring salmat…

  49. roberto butin says:

    nice tutorial

  50. Joely Mariano says:

    Salamat sir ako nlamg magvwiriy sa bahay

  51. Joely Mariano says:

    Sir paano po mag install hang second floor tios naman sir… Salamat

  52. Wilmar Bayubay says:

    Boss 20ampere tong breaker ko.. Magpapalit Sana ako ng 40ampere breaker. Single breaker lng po tong gmit ko.. Size 12 po Yung stranded wire ko sa ilaw at outlet. OK lng po b sa 40ampere na breaker?

  53. Butlig Butlig says:

    malinaw kong paano ginawa..madali talagang maintindihan…salamat boss…gawa kapa ng marami.

  54. Frederick Magdayo says:

    Pag mag lagay pa nang isang pang switch saan i connect sir.

  55. Mark Vincent Tolibas says:

    Bos may problima po ako. Kasi.. yong pina pa ilaw ko tatlong kwarto. Ang ona at pangalawang kwarto may junction box ang pangatlo wala po tas yong lang pangatlo yoong omi elaw boss. Ona at pangalawa den po na ilaw miron den po yong outlit po.. ano pong problima nito po

  56. Lito Torena says:

    Sir gawa kayo video paano mag install ng three phase

  57. The ConstructionPhil. Tv says:

    nice video bro more videos po isa rin po akung electrician…

  58. Eric Bunag says:

    inaantok kpa ata brad hehe

  59. Eric Bunag says:

    too slow sir kung manual testing mga switch saka ang wiring kung di ka sure sa kabit mo gawa ka ng test kada instal ng linya mula juncktion to utility kasama switch

  60. Eric Bunag says:

    sana pinakita mo mula entrance to outlet hehe

  61. Maharlikans Pinoy Tutorial says:

    ito po yung facebook group po natin https://www.facebook.com/groups/941689086194080/?ref=pages_group_cta

  62. Jeralyn Lingcopines says:

    Ok lang na may kasamang service outlet ang circuit mo sa mga ilaw? Parang di po yata standard yun???

  63. Olivia Balasa says:

    Sir…good day po…ask lng po….nagpagawa kasi ako ng extension na mallit na bahay( for renting)
    adjacent lng sa main house .Saan po ako maconnect electrical wire sa mqin line or pwede nq ba ako mag top n lng sa existing ko na wiring sa main house…..thanks po

  64. Pedro Penduko says:

    Sir..na confused lng po ako. Halimbawa po..ung outlet may naka saksak na plantsa.. Wala po bang direct effect.. Sa ilaw.. Sample po led po ilaw na gamit.. Di po kaya mag agawan sa suply. Thank you po sir.. Sa magiging sagot

  65. Sonofdragon Luffy says:

    PUTANG INA MO WALANG AKONG MARINIG SA SINASABI MONG HAYOP KA!!! DI AKO MARUNONG MAG ENGLISH TANGA!

  66. ampere king says:

    Magaling sir! Basic practical electricity. Actually i'm a retired employee as a maintenance elect'n. Dahil sa napanood ko ito nainspired ako marami din akong kaalaman na pwde kong gawin at ishare. Gud luck sir

  67. Ronnel Azaña says:

    Lashing

  68. Bikori Dayagro says:

    Bigyan mo naman buhay ang pagsasalita mo

  69. Bebe Bilog says:

    May sipon ka brod?

  70. Michael Abrogar says:

    Gudam sir, Myron po ako mga katanungan regarding sa tamang computation wiring sa bahay, una ko pong tanong, Pano ba ang computation pagkasama ang ilaw at outlate wiring sa bahay? KC ang ilaw ko po ay NASA 35 pcs bulbs 4pcs florescent 40watts at the rest below 10watts. At outlate NASA 15pcs? ang pangalawa ko pong tanong overload na po ba?

  71. robert reyes says:

    Idol paano kung walang tester pwd poh install yong mga ilaw at outlet..slamat sasagot..

  72. RED BLOOMING HEART says:

    Nice one boss. Isa di akong electrical practitioner na gustong mgshare ng kaalaman about electrical lalo na sa safety..kasalukuyan po akong gumagawa ng mga lecture na ia.upload ko soon..

  73. June Elegores says:

    Sir hindi po ako electrician pero tama po ba ang connection ng c.o at sa lighting magkasama?

  74. kloud villaruz porol says:

    Salamat master….mas naintindian ko lahat…..salamat din sa diagram

  75. martinngabb gabbs says:

    Lasing kaba

  76. Dodoi Coh says:

    boss turuan din kita mag recover ng deleted video. 🙂

  77. Rizal Padua says:

    Magandang gabe po idol tanong kulng po kung magkano ang labor ng isang electrician, wala po kc akung knowleged about electrical magpapa installation po kc ako sa loob ng bahay mag kano ba ang bayad magkabit ng panel board at mga unit? Merry christmas po thank you

  78. deston farocanog says:

    bosing ung paggawa nga po nang sunod sunod na saksakan o outlet sana po mapakita mo po salamat po

  79. deston farocanog says:

    sana po matutorial mo ung maraming saksakan po bosing salamat po

  80. GG DOT says:

    Sir pa advice po gusto ko pong mag self study about sa electrical wala pa po akong idea e. saan po ba ako pwedeng mag simula ?

  81. Pippa pig says:

    Don’t they have any ground earth cables in their electrical system?

  82. Ake Rosales says:

    I have what it looks like a c13 plug but it only has 2 holes. Can i just put another hole in it so it will fit on a c14? Pls help

  83. RED BLOOMING HEART says:

    Ok yong explaination boss. Isa din akong licensed electrical practitioner from mindanao. Sayo po ako nainspire .kaya ngcreate ako ng youtube channel. Kasi gusto ko din maishare yong mga standard electrical safety practices. Kasalukuyan po akong ng.a.upload ng video. Pero sa ngayon basic definitions and principles lng muna..basic lng muna kasi ang basic isa yan sa mga pundasyon kung tayo ngayon. Sana makita rin ng mga subscribers mo. At magustuhan nila.sabi nga ng isang youtuber. Dapat tauong mga pinoy"mgtulungan tayo pataas, wg tayong mghilahan pababa.good day mga ka.wirings

  84. Brendon Mak says:

    Sir, paano malalaman kung ang linya na galing sa main line, service provider mo ay L1 neutral & L2 hotwire or same L1 & L2 ay hot wire or 110 parehas? Pasagot lang sir.

  85. Jamar Castro says:

    Boss parang kulang ka yata sa tulog? Tulig ka muna..

  86. Don Lopez says:

    Walang kwenta Malamya, kuya kumain kna ba??

  87. Renan Escasinas says:

    Boss.gusto q mag add nang isa pang outlet…pag bukas q sa junction box…d ko alam kung alin ung line to ground and line to line/hot line….same wire color…
    Panu malaman kung walang tester?…

  88. VRSZF Technical Course TUTORIAL says:

    Good job. maraming natutulungan. God bless.

  89. reven quider says:

    boss pano mag install ng dalawang breaker ung isa para sa ilaw ang isa para sa outlet

  90. Wrence Verano says:

    Sir tatanong ko lang kasi un ac ko ang voltage nya 220 v 50 HZ tapos I plug ko sa 220 v 50~60 HZ wala bang problem. Salamat

  91. ANIME and Games LOVERS says:

    Ito ang dapat pinapanuod natin may matutunan pa tau…

  92. jv.elektrika 101 says:

    Ayos sr. Malinaw instruction pano gawin :).
    Try ko to gawin sa channel ko 🙂 salamat

  93. Eludo Jerald says:

    Di pwedi mag sama outlet sa line1 line 2. Lalo na 3d floor na

  94. Lynn Bendoy says:

    Nakaantok

  95. Kata tuku Shi chi says:

    Pa dalaw Naman sa bahay ko

  96. lino saracho says:

    Jan po ba sa outlet pwede po ba mag kabit ng isang outlet ?

  97. Jay-ar Angeles says:

    Sir okay lang ba mag add ng line ng outlet kahit 2 ilang na at dalawang switch ang nakainstall sa iisang box..??

  98. lapay tupa says:

    basic naman ginagawa mo ..

  99. lapay tupa says:

    unlike na ..

  100. daniel evasco says:

    boss ok yung tutorial mo,,,,,kaso sana ganado ka mag salita parang matutulog..student ehehhehehe thanks

Leave a Reply

Your email address will not be published. Required fields are marked *