Crazy high-end soldering and reworking stations – JBC | Electronics Makers


With cheap irons, you might get about 50 watts, 60 watts, 80 watts. With our entry line unit, you have 135 watts. And thanks to our heating system where we just get from the very top of the tip. We’re really good on keeping that temperature constant and reaching out temperature really fast. As you can see, if I leave the tool from the stand, it just takes about 3 seconds to heat up. And reach desired temperature. [Music] We’re a premium manufacturer of soldering equipment and rework equipment. And the company is based in Barcelona, Spain. Everything is manufactured in Europe. We have a two years warranty on all the products. And what JVC tries to do is, we try to be ahead in terms of innovation. There are many different irons, right? There are many different brands and you can go from a $15 soldering iron to a more expensive equipment. What’s the difference, right? Because with $15 iron, maybe it does the job for you. But with the more expensive equipment, for example with JVC equipment. What we have is that we have the thermocouple sensor riding the very top of the tip. So you have more control with our stations. We offer from prototype tips to which release address ability system where you can monitor all the stations from a computer. You can analyze all the data, you can download temperature graphs, four-wheel drive. And the main idea is that the operator will have a PCB on the board. And when they will scan it, it’s going to auto set up the station, with the maximum temperature that can use minimum. It’s going to record everything. So even two years you have a problem with one board, you will be able to trace back soldering that board, temperature he was working on and all of that. While the thing is JVC has regular irons or most people knew a soldering iron, but we have two very special units. One is the Nano station for which we have the smallest tips in the market. We get 2.1 millimeters in tip and the mean difference is, You can get to point .1 millimeters on the ammeter on the other soldering irons. But these ones are very thin and the toys very ergonomic. So it makes it really easy to rework one component with a burning the one next to it. And very easy to see under the microscope as well. Far from soldering equipments, we have rework equipments. So, this what you’re looking at right now is a hotter station. And there are many different in the market, right? What we have, what we always try to deliver to our customers is that you have more control. So, our station comes with a thermocouple. So what you can do is you can set up soldering profiles. So you can heat up gradually and control the temperature. And we also have this what we call a protection regulation mode So, you can receive this to any critical component, set a temperature. And make sure it doesn’t go over the temperature and you don’t over keep that component. Normally as you said, traditionally people will use that white sponge, wet sponge that will create a thermal shock into the tip. That’s really bad for the tip, IPC doesn’t recommend that. Or they will use the brass wool. The problem with the brass wool is that you get a splashes. Something to drag out solder, you clean on the same spot, it takes more time. And company selling with found issues will have a problem with that. What we came out with is this nice, tiny tip cleaner that has two brushes inside and a sensor. So it detects when you insert the tool and it starts automatically speeding. And it takes just one second in and out to clean the tip. It keeps everything inside and it keeps it clean fast. Its going to extend the life of the tip because it’s not so aggressive with the tip. It just takes one second to clean it and there won’t be any further issues. So, there are two very important things to be able to always keep on that level, the temperature constant. One is the heating system and the other one is how powerful the unit is. With cheap irons, you might get about 50 watts, 60 watts, 80 watts with our entry line unit, you have 135 watts. And thanks to our heating system where we just get from the very top of the tip. We are really good on keeping that temperature constant and reaching out temperature really fast. As you can see, if I leave the tool from the stand, it just takes about 3 seconds to heat up and reach desired temperature. [Music]

2 comments on “Crazy high-end soldering and reworking stations – JBC | Electronics Makers”

  1. u666sa says:

    I wonder, to spend 2 grand on hot air station and another 2 grand on 4 tool station for two irons, tweezers, and desolder, or keep my 200 buck aoyue that works fine for me?

  2. sudeesh veekey says:

    Where can I buy this from India?

Leave a Reply

Your email address will not be published. Required fields are marked *